Power Sound Audio S3600i

Add to my wishlist

Data sheet

Unit of MeasurementUnit
Quantity1

More info

The S3600i offers an unheard of value in the audio industry. Dual high efficiency 18" drivers, a conservatively rated 1700W amplifier with ICEpower® sound technology, and a brand new dual opposed enclosure that relies on Newton's third law of motion to completely cancel all reactive energy. The end result is a subwoofer that extends into the single digits in all but the largest of rooms, offers vision blurring mid and upper bass capabilities, and does all of this while remaining completely inert.

 

 

FEATURES

 

  • Two, USA built, proprietary 18" drivers with powerful motor strength and efficiency.
  • Patented digital ICEpower® 1700W amplifier with DSP control
  • CNC precision cut cabinets that are finished in our industry exclusive satin black texture
  • 17Hz-200Hz +/-3dB (7Hz-11Hz typical in-room extension)

 

 

CEA-2010 RATINGS

 

  • Ultra-low bass (20-31.5 Hz): 120.7dB
  • Low bass (40-63Hz): 132.1dB

 

 

*Subtract 9dB for an equivalent RMS 2m ground plane measurement distance.

 

 

Technical Data

 

Size (D x W x H)

20” x 28” x 24”

Weight

137 lbs

Driver(s)Two 18”
Amp TechnologyICEpower
Amp Power725W
System Type

Sealed

In-room Extension

11Hz

Wood Finish

No

Shipping Weight180 lbs

 

 

 

CEA-2010

 

16Hz – 25Hz

115.1

31Hz – 50HZ

130.7

63Hz – 100Hz135.0
16Hz – 100Hz135.0
PSA Output Factor*1.0

 

  •          The PSA Output Factor shows how many subwoofers it takes to equal the output of the highlighted Power Sound Audio subwoofer. 

 

Feature

 

DRIVER 

 

  •          Two Power Sound Audio proprietary 18” drivers
  •          Extended and vented pole geometry
  •          Vented back plate to maximize air flow
  •          Extremely linear and dynamic motor system
  •          Epoxy reinforced cone neck/apex joint
  •          Concentric foam surround, treated for longevity
  •          Highly treated, rigid paper cone body
  •          Die-cast rigid aluminum frame
  •          Three inch diameter, four layer copper voice coil wound on a rigid multi-layer aluminum former with Kapton heat shielding
  •          Fatigue limiting designed, silver alloy lead wires
  •          Single poly cotton semi-progressive, high excursion spider
  •          Paper outer dust cap with acrylic coating
  •          Inner Mass Loading Cap that also strengthens the cone body
  •          Assembled in the USA

 

AMPLIFIER SPECIFICATIONS

 

  •          ICEpower® audio technology
  •          Amplifier Power: 1700 watts
  •          Inputs: Left and Right RCA inputs
  •          On, Auto, Off selector
  •          Gain control
  •          Time delay(phase) control
  •          Crossover control
  •          Room size control
  •          Custom DSP(digital signal processing) enables superior engineering refinement
  •          CE and FCC approved; EMC and safety pre-approved
  •          Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
  •          Patented HCOM modulation and control techniques for unparalleled audio accuracy
  •          Sound optimized soft clipping
  •          Soft start power up with mute/de-mute.
  •          Thermal and over-current protection
  •          Standby converter with low standby power consumption (less than 1 watt)
  •          Universal mains operation (100-240 V, 50-60 Hz)
  •          Standby power consumption 170 mW @ 230 V
  •          ErP (1275/2008/EC) compliant
  •          Energy Star®v3.0 compliant
  •          117 dBA dynamic range
  •          THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
  •          THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
  •          CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
  •          High output current limit of 30 A

 

ENCLOSURE

 

  •          Sealed enclosure
  •          Dual opposed, side-firing drivers with grill covers
  •          Super durable, black sand textured finish
  •          Precision machined CNC panels for perfect fit of all components
  •          Rigid MDF baffles 
  •          Dimensions (D x W x H): 20” x 28” x 24” includes grills
  •          Weight: 137 lbs
  •          Made in the USA